When faced with a broken pipe, it can be difficult to decide what to do. In order to prevent further damage, repairing the pipe immediately is essential. Water from a burst pipe can wreak havoc on walls and ceilings. Don’t try to dry the soaked area yourself. You may end up inviting mould or mildew to your home. Before calling a plumber, turn off electricity to the affected area and turn off the water at the mains supply.
If you suspect that your pipes are leaking, shut off water to all of the fixtures in your house. Then, take a reading from the water meter located on the front boundary of your property. After 15 minutes, if you notice an increase in the reading, check the meter again. The meter reading will likely have increased. Water leaking from the pipes could be the culprit. Make sure to fix the pipes as soon as possible! Should you require Drain Lining for your pipes, get in touch with a site like www.wilkinson-env.co.uk/news/drain-lining-no-dig-repair/
Depending on the size of the leaking pipes, you may have to temporarily shut down water. You should also turn off the main water shutoff valve. The faster you can remove the water, the less water damage you’ll experience. If you can’t find the shutoff valve, call a n emergency plumber. Ensure that the valve is labelled so that you don’t confuse it with the wrong valve in the future.
The most important thing to do immediately after a pipe burst is shut off the water and turn off electricity. You can usually find the shut-off valve in your home, but make sure to turn the electrical panel off as well. This will drain out the remaining water and relieve the pressure. If you are not sure of the type of pipe you have, contact a plumber immediately. When you have an emergency, the water is shut off and the electricity can be turned back on once the issue is isolated, but the plumbing repair is likely to be a major job.
Another way to fix a broken pipe is to use a form of repair sleeves. These will help to patch the damaged area, while allowing water to escape. The repair sleeve should be cut halfway around the pipe. Then, use a hose clamp to secure the sleeve. While these are temporary solutions, you should not use them for too long. If the leak is too severe, call a plumber immediately.
